May-12-2022
Q420FT plate is a kind of steel plate for wind power towers. The trademarks are Q420FTC, Q420FTD, Q420FTE and Q420FTF. When the steel plate is required to have the function in the thickness direction, the symbols Z15, Z25, Z35 are added to the grade. Q420
May-10-2022
The grades with (H) after the common steel material number include 12Cr1MoR (H), 12Cr2MoR (H), 14Cr1MoR (H) and 15CrMoR (H), in which (H) means hydrogen (abbreviated as HTHA), which is mainly used in medium and high temperature environments such as hydrog
Apr-28-2022
SA203 GrE steel is equivalent to 08Ni3DR of the standard GB3531, with a nickel content of 3.5%, commonly known as 3.5Ni steel. SA203 GrE nickel steel plates are for low temperature pressure vessels at -100 degrees Celsius.SA203 GrE low temperature steel p
Apr-28-2022
SA203 steel plate belongs to nickel-based low-temperature steel for pressure vessels, and implements American ASME standard. SA203 series steel plate has five grades: A, B, D, E, F.Maximum thickness limit of SA203 steel plate: Grade Maximum Thickne
Apr-26-2022
SA542TypeDCL4a steel plate is a steel plate for high temperature and high pressure vessels. SA542TypeDCL4a2 steel plate is a heat-resistant and hydrogen-resistant steel widely used in the world. It has good high temperature mechanical properties, high tem
Apr-26-2022
Quality characteristics of SA516 Gr485 (HIC) steel plate:1. The SA516 Gr485 (HIC) steel plate has low P and S content, high purity and good resistance to wet hydrogen sulfide corrosion.2. Good low temperature toughness, and the SA516 Gr485 (HIC) plate abo
Apr-22-2022
The manufacture of SA516 Gr485 (HIC) steel can be made by basic oxygen blown converter or electric furnace steelmaking process and additional secondary refining and vacuum degassing (oxygen content not more than 0.0020%) is required in the ladle metallurg
Apr-22-2022
SA516 Gr485N(HIC) is a carbon steel plate for medium and low temperature pressure vessels. It is an American standard hydrogen sulfide corrosion resistant vessel plate, which is widely used in the petrochemical manufacturing industry.SA516 Gr485N (HIC) pr
Apr-19-2022
X12CrMo5 steel plate is European standard container plate, X12CrMo5 is alloy special steel with high temperature function, X12CrMo5 executive standard: EN10028.X12CrMo5 steel plate is tempered by electric furnace + out-of-furnace extraction + vacuum degas
Apr-19-2022
WearTUf400 wear plate can be widely used in traditional earth moving, mining and transportation equipment such as buckets, dump trucks, dump trucks, crushers, hammer heads, conveyors and other mining conveying equipment. Such as road and off-highway dump
Apr-15-2022
WearTUf400 plate is a Singapore wear-resistant steel plate, WearTUf400 corresponds to the standard grade NM400, WearTUf400 is a full martensitic wear-resistant steel plate, and the typical Brinell hardness is 400HBW.WearTUf400 wear plate technical standar
Apr-15-2022
1Cr5Mo steel is a martensitic metal structure. 1Cr5Mo has good oxidation resistance at about 650℃, good thermal strength below 600℃, and good shock absorption and thermal conductivity. 1Cr5Mo steel is widely used in steam turbines.15CrMo steel plate is a
Apr-12-2022
Q345R (R-HIC) pressure vessel steel plate mechanical properties:
Q345R (R-HIC) steel plate thickness 8-16mm:
Tensile strength Rm/Mpa (N/mm2): 510-640
Yield strength ReL/Mp(N/mm2): ≥345
Elongation A/%: 21
Impact test temperature /: -30
Shock a
Apr-12-2022
Corten B steel plate delivery status: hot rolled.Corten B steel plate chemical composition, chemical element analysis:
C:≤0.19, Si: 0.30-0.65, Mn: 0.80 - 1.25, P:≤0.035, S:≤0.035, Cr: 0.40 - 0.65, Ni:≤0.40, Cu: 0.25 - 0.40, V:
Apr-08-2022
NR400ZL steel plate is low-alloy high-strength steel plate for converter shell.NR400ZL steel plate ultrasonic flaw detection standard:
NR400ZL steel plates are subjected to ultrasonic flaw detection one by one. The ultrasonic flaw detection method for st
Latest Products
Henan BEBON Iron&Steel co.,ltd.
Language
Online Consultation
