Mar-27-2025
The mechanical properties of 410 alloy martensitic stainless steel plate are significantly dependent on the heat treatment process. After quenching and tempering, its hardness can reach HRC 40-45, tensile strength can reach 850-1100 MPa, and yield strengt
Mar-27-2025
410 grade stainless steel is a typical representative of martensitic stainless steel, containing 11.5% -13.5% chromium and 0.08% -0.15% carbon, with moderate corrosion resistance and high mechanical strength. Through the heat treatment process of quenchin
Mar-27-2025
The main difference between 410 and 410S stainless steel lies in their chemical composition and physical properties. 410 stainless steel has a high carbon content (0.08%-0.15%), and after heat treatment, its hardness and strength are better, but its britt
Mar-21-2025
AISI 304L (UNS S30403) is a low-carbon austenitic stainless steel with strong corrosion resistance and excellent weldability. AISI type 304L stainless steel sheet‌ is widely used in food processing, chemical equipment, and storage tanks to avoid
Mar-21-2025
304L stainless steel plate (UNS S30403) has low carbon content and excellent resistance to intergranular corrosion after welding. It is widely used in food processing equipment, chemical storage tanks, and pipelines, meeting hygiene and acid and alkali re
Mar-20-2025
AISI 431 (UNS S43100) martensitic stainless steel plate has high hardness and requires laser or waterjet cutting to avoid thermal deformation and cracking. Accurate control of parameters can reduce residual stress and ensure the dimensional stability of f
Mar-20-2025
Grade 431 stainless steel sheet (UNS S43100) has become the preferred material for key components such as automotive transmission shafts, mechanical gears, and marine pumps and valves due to its high strength, corrosion resistance, and wear resistance. Af
Mar-20-2025
Alloy 431 (UNS S43100) is a martensitic stainless steel known for its high strength, corrosion resistance, and wear resistance, and is widely used in the automotive, mechanical, and marine engineering fields. It enhances corrosion resistance and strength
Mar-14-2025
AISI 431 (UNS S43100) perforated plate is composed of 15% -17% chromium (Cr) and 1.25% -2.5% nickel (Ni) as the core components, with a carbon content strictly limited to ≤ 0.20%. Through quenching and tempering processes, it can achieve a tensile
Mar-14-2025
Grade 431 stainless steel (UNS S43100) is a martensitic alloy containing 15% -17% chromium (Cr) and 1.25% -2.5% nickel (Ni). The carbon content is strictly limited to ≤0.20%. Through quenching and tempering processes, it can achieve a hardness of 5
Mar-11-2025
AISI 431 (S43100) stainless steel sheet coil significantly improves its comprehensive performance through optimized hot rolling process, with yield strength and tensile strength reaching over 650MPa and 850MPa respectively, and elongation rate increased t
Mar-11-2025
After quenching and tempering processes, the hardness of hardened (H) 431 stainless steel (AISI 431/S43100) can be increased to 58-60HRC, with a tensile strength of over 1080MPa, while maintaining a 10% elongation and 39J impact toughness. Its carbon cont
Mar-11-2025
AISI 431 (1.4057/S43100) is a martensitic stainless steel known for its high strength, wear resistance, and moderate corrosion resistance. Its composition includes 15% -17% chromium (Cr) and 1.25% -2.5% nickel (Ni). Through heat treatment, the balance bet
Mar-07-2025
Corrosion resistant stainless steel plates 347 and 347H are produced according to ASTM A240 standard. Among them, 347 contains niobium element, which can effectively resist intergranular corrosion and maintain good mechanical properties in high temperatur
Mar-07-2025
347H (UNS S34709) is a high carbon niobium stabilized austenitic stainless steel designed specifically for high-temperature applications. Its niobium element not only enhances its resistance to intergranular corrosion, but also improves its stability in h
Latest Products
Henan BEBON Iron&Steel co.,ltd.
Language
Online Consultation
