Jan-09-2023
Terms of S355NL steel plate:
S355NL steel plate is an alloy structural steel plate, in which "S" represents a structural steel, "355" represents the yield strength of the steel plate, "N" represents the delivery status of th
Jan-09-2023
Standard analysis of S355K2+N steel plate and Q355NE steel plate:
S355K2+N steel plate is the European standard alloy structural steel plate, and the technical standard is EN10025-2; The Q355NE steel plate is a national standard alloy steel plate, and th
Jan-05-2023
Material analysis of P235GH steel plate:
P235GH steel plate is a European standard pressure vessel steel plate, and its corresponding number is 1.0345. It is classified as non alloy quality steel according to EN10020 classification rules for steel plate
Jan-05-2023
Introduction to S420NL steel plate:
S420NL steel is a fine grain structural steel. It is a high-strength steel plate under the European standard EN 10025. S420NL steel plate has higher comprehensive mechanical properties in the normalized or normalized p
Jan-03-2023
Introduction to StE460 steel plate:
StE460 plate is a German standard steel plate. StE460 belongs to fine grain steel. StE460 steel plate is used for car longitudinal beams, cross beams and other structural parts that require excellent cold formability a
Jan-03-2023
P355NL2 steel plate is European standard vessel steel plate, which is normalized and weldable fine grain steel plate. There are four grades: P355N (room temperature), P355NH (high temperature), P355NL1 (low temperature) and P355NL2 (special low temperatur
Dec-30-2022
Recently, the Ukraine Renewable Metals Association said that in 2022, the annual steel output of Ukraine will reach 6.5 million tons, down 69.5% year on year; The purchase of scrap steel will reach 930,000 tons, down 77.5% year on year. In 2023, the outpu
Dec-28-2022
Q370R steel plate belongs to boiler and pressure vessel plate.
Executive standard: GB713.
"Q" stands for yield strength, "370" stands for yield value (MPa), and R stands for vessel steel.
The old standard grade is 15MnNbR.Chemical c
Dec-28-2022
Q690D steel plate belongs to high-strength welded structural steel. Where Q represents the yield strength, 690 represents the yield strength value, and D represents the grade of steel plate. The quality grades are A, B, C, D and E. The impact of Q690 grad
Dec-26-2022
With excellent performance, heat resistance and corrosion resistance, 16Mo3 steel is often used as a weldable steel in the manufacture of boilers and widely used in the oil and gas chemical industries.The standard implemented by 16Mo3 steel plate is: EN10
Dec-26-2022
Q960E steel plate belongs to high-strength quenched and tempered steel plate. Q means yield of steel plate, with yield strength of 960, and E of Q960E means -40 ˚C impact.Q960E steel plate not only has very high strength, but also has certain toughness, i
Dec-22-2022
15CrMo alloy structural steel is a pearlitic heat-resistant steel with high thermal strength at high temperature（ δ B ≥ 440MPa) and oxidation resistance, and has certain hydrogen corrosion resistance. Due to the high content of Cr, C and
Dec-22-2022
NM450, NM indicates wear resistance, and 450 indicates that the average Brinell hardness is about 450. NM450 steel is widely used in metallurgical industry, road construction industry, sand mill barrel, blade, U-shaped dump truck, various cargo yards, wha
Dec-19-2022
Characteristics of S355NL steel plate: impact absorption energy test shall be conducted in a low temperature environment of -50℃, and the impact value shall not be less than 27J.Characteristics of S355ML steel plate: the yield value will decrease with the
Dec-19-2022
Use of S355NL steel plates: It is used in construction machinery, mining machinery, metallurgy and environmental protection, water conservancy and hydropower and other structural parts.Use of S355ML steel plates: widely used in bridges, vehicles, ships, b
Latest Products
Henan BEBON Iron&Steel co.,ltd.
Language
Online Consultation
