Apr-26-2023
There is an important characteristic of AH36 steel, that is its excellent corrosion resistance, which is the ability of a material to resist damage caused by exposure to corrosive substances such as saltwater, acids, or gases. Corrosion can cause structur
Apr-26-2023
AH36 steel sheet has good formability, which is the ability of a material to be shaped or formed without cracking or breaking. This property makes AH36 steel sheet easy to machine or fabricate into complex shapes or structures. However, care must be taken
Apr-21-2023
Various materials can be used to make small size non magnetic protective ring, such as 40Mn18Cr3, 40Mn18Cr4V, 50Mn18Cr5. The 40Mn18Cr4V non-magnetic steel material is mostly used for small power motors, and the protective ring components are mostly small
Apr-21-2023
The motor stator tooth pressure bridge is generally processed from non-magnetic flat steel 40Mn18Cr4. The tooth pressure bridge is also called teeth pressure plates, tooth pressure plates, and tooth pressure strips. Regardless of the name, the actual obje
Apr-21-2023
40Mn18Cr3 non magnetic steel can be strengthened using special forging, heat treatment processes, and new strengthening processes to improve its strength.Non magnetic steel actually refers to steel that lacks ferromagnetism and cannot be magnetized. Requi
Apr-21-2023
25CrMo4 alloy steel is used for manufacturing high-pressure pipes and various fasteners, as well as higher grade carburized parts such as gears, shafts, etc., working in non corrosive media and media with a working temperature below 250℃ and containing a
Apr-18-2023
Q355 carbon steel plate introduction:
Executive standard: GB/1591-2018;
The quality level is: B, C, D, E, F (without A level);
Regarding the designation: Q - represents the yield strength;
N - indicates that the delivery status is normalized or normal
Apr-18-2023
Q345D-Z15 is a low alloy Z-direction performance steel.
The grade of Q345D-Z15 steel consists of three parts: the yield strength, the yield strength value, and the quality grade symbol, such as Q345D. Among them: The first letter Q represents the yield s
Apr-18-2023
The grade of bridge steel, Q - the yield point of bridge steel; 370- yield point value, in MPa; Q bridge; C-The quality level is Grade C, the execution standard is GB/T714.Q370q bridge steel composition:
C:≤0.18; Si:≤0.55; Mn: 0.90-1.70; P:
Apr-18-2023
P295GH European standard steel plate for boilers and pressure vessels specification: Thickness 8mm to 160mm, width 1500mm-4200mm.The size, shape, weight, and allowable deviation of boiler plate P295GH should comply with the provisions of EN10029. The allo
Apr-13-2023
SS400 carbon steel plate is a representation of Japanese steel material and a judgment standard, equivalent to Q235 steel (also known as A3 steel) in China. Structural steel in foreign standards is often classified according to tensile strength, such as S
Apr-13-2023
Main characteristics of 25Cr2MoVA steel plate:
25Cr2MoVA steel plate is a medium carbon heat-resistant steel with high strength and toughness. When the temperature is below 500℃, the high-temperature performance is good, the hardenability is good, the ma
Apr-13-2023
Introduction to 50Mn2V alloy steel plate:
50Mn2V plate belongs to alloy structural steel plate and is commonly used in stone processing plants, road infrastructure, etc.Delivery status of 50Mn2V steel plate: hot rolling, pickling, quenching, cold rolling
Apr-13-2023
SS400 is a marking method for Japanese steel, which is actually Q235 steel in China. Q represents the yield strength of this material, followed by 235, which refers to the yield value of this material, around 235. And as the thickness of the material incr
Apr-10-2023
Introduction to European standard P355NL2 steel plate for pressure vessels:
P355NL2 plate belongs to the European standard pressure vessel steel plate, and the steel plate can withstand low temperatures up to -50℃. Therefore, P355NL2 steel plate belongs
Latest Products
Henan BEBON Iron&Steel co.,ltd.
Language
Online Consultation
