Cold drawn ASTM A179 condenser steel pipe

ASTM A179 steel pipe is known as condenser steel pipe. ASTM A179 steel pipes are produced in a seamless and cold-drawn process.   
ASTM A179 Condenser Pipe Chemical Composition:

C	Mn	P ≥	S ≥	Si
0.06-0.18	0.27-0.63	0.035	0.035	0.25

 
ASTM A179 Condenser Pipe Mechanical Properties

Tensile strength Ksi (Mpa)	Yield strength Ksi (Mpa)	Elongation(50mm)%	Hardness
47(325)	26(180)	35	=72HRB

 
ASTM A179 Condenser Pipe Specification
1) Demension: OD 3.2 - 76.2 mm (1/8in-3in)
2) Technology: seamless cold draw
3) Surface treatment: black painting
4) Application: heat exchanger and condenser
5) Package: Packed in seaworthy bags, flat ends
6) Testing: EN 10204/3.1or EN 10204/3.2 rolling certificates SGS, BV
 
BN steel can supply ASTM A179 condenser steel pipe, heat exchanger steel pipe, low carbon steel pipe, seamless steel pipe, cold drawn steel pipe, A179 low carbon steel pipe, A179 steel pipe, A179 carbon boiler pipe. The pipes shall be heat-treated at 1200°F or higher after final cold-drawing. The finished pipe shall be no scaling, a small amount of oxide as scale formation and mechanical test, requirement: Flattenting flaring test flange testing hardness test water pressure test.