How to control the thickness of bridge steel formwork

As we all know, bridge steel formwork manufacturers need to pay attention to its thickness during the manufacturing process. This factor directly affects the subsequent construction and use. Therefore, it is necessary to pay attention to the thickness control of the bridge steel formwork and take measures according to the situation.

1. If the pillar mold of the bridge steel template adopts composite steel mold, the panel control is more suitable within 3-5mm. The main force depends on the choice and spacing of the inner and outer ribs of the template.

2. Due to the complexity of bridge steel formwork construction, in addition to the main formwork requiring high strength, ordinary bridge steel formwork has strong adaptability and meets various needs of bridge construction. The bridge steel formwork must have strong compatibility or adaptability. The cross section of the column steel formwork is round, truncated, hyperbolic, etc. The division method is generally divided according to the degree of difficulty of drafting and rounding, and the height is determined according to the structure diagram and the schedule. The height of the bridge steel formwork is usually set to an integer multiple of 1.52 or 0.5m, which is convenient for placement.

3. The width of the adhesive formwork used in the construction of bridge steel formwork is usually about 1200mm, the length is about 2400mm, and the thickness is about 12-18mm.

The thickness of the bridge steel formwork can be used flexibly in different situations, mainly based on the actual data of the bridge. Choosing the right thickness will get better results in the subsequent construction process, and the construction effect will be smoother. In short, many aspects need to be considered to control the thickness of bridge steel formwork.