ASTM A240 410S Stainless Steel Hot Rolled Strips in Coil

BEBON IRON STEEL is able to supply ASTM A240 410S Stainless Steel plates, sheets and strips in coil. 410S SS plates and strips can be delivered in hot rolled.
Chemical Composition(by weight):
Chromium- Between 11.5-14.5%
Nickel- Up to 0.60% max
Carbon- Up to 0.08% max
Manganese- Up to 1% max
Phosphorus- Up to 0.040% max
Sulfur- Up to 0.030% max
Silicon- Up to 1% max
Properties: 410S stainless steel is a low carbon modification of Type 410 stainless steel. Low carbon and optionally a small addition of titanium and/ or columbium minimize austenite formation at high temperatures, thereby restricting the alloy's ability to harden. ASTM A240 410S stainelss steel material remains soft and ductile even when it is rapidly cooled from above the critical temperature. This low hardening characteristic in Alloy 410S Coils helps to prevent cracking when the steel is welded or exposed to high temperatures. Grade 410S Stainless Steel Stripss have good oxidation resistance. It also exhibits adequate corrosion resistance similar to SS 410 and good oxidation resistance. Meanwhile, ASTM A240 410S stainless steel hot rolled strip resists oxidation and scaling up to 1200 Degree F, and also resists abrasion and wear better than most 300 series stainless steels.
Typical Applications:Because 410S cools from elevated temperatures without hardening, it is particularly useful for annealing boxes, quenching racks, oxidation resistant partitions and other high-temperature units. SS 410S strip and plate also is used in the petrochemical industry for tower packing and distillation trays.