J 403-AISI 1049 1050 steel plate

BEBON steel is J 403-AISI 1049 1050 steel supplier,we have much experience in manufacture J 403-AISI 1049 1050 steel, We could give the fastest delivery time on the base of our competitive price directly from our mill. if you need know steel grade feature,we can provide J 403-AISI 1049 1050 chemical composition and J 403-AISI 1049 1050 mechanical properties.

SAE J 403-AISI 1049 / 1050 steel plate high carbon steel
1049 / 1050 steel plate,SAE J 403-AISI 1049 / 1050 steel plate, under SAE J 403-AISI standard, we can regard 1049 / 1050 steel plate as high carbon steel.

SAE J 403-AISI 1049 / 1050 carbon steels at room temperature (25°C) ranges from 190 to 210 GPa. The typical density of carbon steels is about 7.85 g/cm3. SAE J 403-AISI 1049 / 1050 typical tensile strength varies between 276 and 1882 MPa. The wide range of ultimate tensile strength is largely due to different heat treatment conditions of SAE J 403-AISI 1049 / 1050.

1049 / 1050 steel plate is one mainly of high carbon steel,SAE J 403-AISI 1049 / 1050 steel plate is one of the higher carbon content (0.47-0.55) steels.It is equal to DIN C50,JUS Č.16301 and NF AF70C55.

1049 / 1050 SAE J 403-AISI Number: 1.0540	Comparison of steel grades
	JUS	Č.16301
	DIN	C50
	BS	-
	GOST	-
	AISI	-
	UNI	-
	NF	(AF70C55)

Chemical analysis -% by mass* of C50 steel

Chemical elements	C	Si max.	Mn	P max.	S max.	Cr max.	Mo max.	Ni max.	Cr+Mo+Ni max.
%, by mass	0,47-0,55	0,40	0,60-0,90	0,045	0,045	0,40	0,10	0,40	0,63 - -
Permissible deviation	±0,02	+ 0,03	±0,04	+ 0,005	+0,005	+0,05	+0,03	+0,05	0,63 - -

At the option of the manufacturer the elements aluminium, titanium, vanadium and niobium may be added singly or in combination for grain size controlpurposes. Elements not quoted in table shall not be added to the steel without the agreement of the purchaser, except for the purpose of finishing the heat. Mechanical properties in the normalized and normalized and tempered conditions of C50 steel

Thickness of ruling section tR
Diameter in mm		tR≤ 100mm	100 < tR≤250mm	250 < tR≤500mm	500 < tR≤1000mm
Remin (N/mm2)		320	290	-	-
Rmmin (N/mm2)		610	590	-	-
A % min.	l-longitudinal	14	14	-	-
A % min.	tr -transverse	-	-	-	-
KV min * (J)	l-longitudinal	-	-	-	-
KV min * (J)	tr -transverse	-	-	-	-

1N/mm2=1MPa Heat treatment conditions

Quenching Temperature,0C	Cooling medium	Tempering Temperature,0C	Normalizing Temperature,0C
810 to 850	Oil or water	550 to 660	830 to 870

If you need to buy J 403-AISI 1049 1050 steel, we will strictly according to the customer put forward the specifications of the J 403-AISI 1049 1050, chemical composition, performance requirements such as supply goods,if you anything pls contact us.

Source:

Tags: