EN10088-1 X3CrNiCuMo17-11-3-2(material no 1.4578)Stainless steel
EN10088-1 X3CrNiCuMo17-11-3-2(material no 1.4578)Stainless steel is a kind of Austenitic Stainless Steel material.
X3CRNICUMO17-11-3-2(MATERIAL NO 1.4578)stainless steelchemical composition is :
| C ≤ |
Si ≤ |
Mn≤ |
P≤ |
S≤ |
N≤ |
Cr |
Mo≤ |
Cu≤ |
Ni |
Nb |
|
0.04 |
1.0 |
2.0 |
0.045 |
0.015 |
0.11 |
16.5-17.5 |
2.0-2.5 |
3.0-3.5 |
10.0-11.0 |
|
X3CRNICUMO17-11-3-2 stainless steel specification:
Round bar steel: Diameter: 1mm-1800mm
Square bar: 50mm*50mm-600mm*600mm
Plate steel/flat bar: Thickness: 0.1mm-80mm Width: 10mm to 1500mm
Tube/pipe:OD:6.0-480.0 mm, WT:0.5 -30 mm
Cold-rolled sheet: 0.3-3.0 mm Width: 1000 -2000 mm
Hot-rolled sheet: 6-120 mm width: 1500-3000 mm
Hot rolled stainless steel sheet (Coil) Thickness: 2.5-20mm width: 1000-3000 mm
Length: We can supply any length based on the customer's requirement
BEBON STEEL can offer X3CRNICUMO17-11-3-2 stainless steel. We registers hundreds of thousands of tons of ex-stock source on our spot trade flatform. If required, we can also offer chemical analysis, mechanical properties and other detailed information. If you are interested in X3CRNICUMO17-11-3-2 stainless steel, please contract BEBON STEEL.
Source:
Tags: X3CrNiMo17-13-3, 201, 202
