EN10088-1 X2CrNiN18-10(material no 1.4311)Stainless steel
EN10088-1 X2CrNiN18-10(material no 1.4311) Stainless steel is a kind of Austenitic Stainless Steel material.
X2CRNIN18-10(MATERIAL NO 1.4311) stainless steelchemical composition is :
| C ≤ |
Si ≤ |
Mn≤ |
P≤ |
S≤ |
N≤ |
Cr |
Mo |
Cu |
Ni |
others |
|
0.030 |
1.00 |
2.00 |
0.045 |
0.015 |
0.12-0.22 |
17.0-19.5 |
- |
- |
8.5-11.5 |
- |
X2CRNIN18-10 stainless steel specification:
Round bar steel: Diameter: 1mm-1800mm
Square bar: 50mm*50mm-600mm*600mm
Plate steel/flat bar: Thickness: 0.1mm-80mm Width: 10mm to 1500mm
Tube/pipe:OD:6.0-480.0 mm, WT:0.5 -30 mm
Cold-rolled sheet: 0.3-3.0 mm Width: 1000 -2000 mm
Hot-rolled sheet: 6-120 mm width: 1500-3000 mm
Hot rolled stainless steel sheet (Coil) Thickness: 2.5-20mm width: 1000-3000 mm
Length: We can supply any length based on the customer's requirement
BEBON STEEL can offer X2CRNIN18-10 stainless steel. We registers hundreds of thousands of tons of ex-stock source on our spot trade flatform. If required, we can also offer chemical analysis, mechanical properties and other detailed information. If you are interested in X2CRNIN18-10 stainless steel, please contract BEBON STEEL.
Source:
