EN10088-1 X1CrNiSi18-15-4(material no 1.4361)Stainless steel
EN10088-1 X1CrNiSi18-15-4(material no 1.4361) Stainless steel is a kind of Austenitic Stainless Steel material.
X1CRNISI18-15-4 stainless steel is one of the most widely used precipitation hardening grades in the business. While soft and ductile in the solution annealed condition, it is capable of high properties with a single precipitation or aging treatment. X1CRNISI18-15-4 stainless steel is Characterized by good corrosion resistance, high harness, toughness and strength.
X1CRNISI18-15-4 stainless steel can be machined in the annealed condition, however condition H1150M will yield best results. Post machining solution treatment of parts will be required prior to final hardening if machining in this condition.
X1CRNISI18-15-4 stainless steel specification:
Round bar steel: 1mm to 3000mm
Square-shape steel: 1mm to 2000mm
Plate steel:0.1mm to 2500mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-219 mm, with wall thickness ranging from 1-35 mm
X1CRNISI18-15-4(MATERIAL NO 1.4361)stainless steelchemical composition is :
| C ≤ |
Si≤ |
Mn≤ |
P≤ |
S≤ |
N≤ |
Cr |
Mo≤ |
Cu≤ |
Ni |
Nb |
|
0.015 |
3.7-4.5 |
2.00 |
0.025 |
0.010 |
0.11 |
16.5-18.5 |
0.20 |
- |
14.0-16.0 |
|
X1CRNISI18-15-4 stainless steel is one of mainly products of BEBON STEEL. We have registered a large number of ex-stock. If you require X1CRNISI18-15-4 stainless steel, we can send goods to you immediately. So, if you are interested in X1CRNISI18-15-4 stainless steel, please contact BEBON STEEL.
Source:
Tags: X1NICRMOCU25-20-5, 201, 202
