EN 10088-1 X2CrMoTi29-4 Stainless steel is a kind of ferritic Stainless Steel material.
EN 10088-1 X2CrMoTi29-4 stainless steel chemical composition
C ≤ |
Si ≤ |
Mn≤ |
P≤ |
S≤ |
Ni |
Cr |
Mo |
Nb |
N≤ |
Ti |
others |
|
0.025 |
1.00 |
1.00 |
0.030 |
0.010 |
- |
28.00-30.00 |
3.50-4.50 |
- |
0.045 |
4*(C+N)+0.15~0.80 |
- |
EN 10088-1 X2CrMoTi29-4 Stainless steel mechanical property:
|
Annealing hardness |
Cold pull hardness |
Preheating temperature |
Quenching temperature |
|
|
salt-bath furnace |
controlled atmosphere furnace |
|||
|
235 |
262 |
788 |
1191 |
1204 |
|
Holding time |
Hardening medium |
Temper temperature |
After tempering hardness |
|
5～15 |
air cooling |
522 |
60 |
EN 10088-1 X2CrMoTi29-4 Stainless steel specification:
Round bar steel: Diameter: 1mm-1800mm
Square bar: 50mm*50mm-600mm*600mm
Plate steel/flat bar: Thickness: 0.1mm-80mm Width: 10mm to 1500mm
Tube/pipe:OD:6.0-480.0 mm, WT:0.5 -30 mm
Cold-rolled sheet: 0.3-3.0 mm Width: 1000 -2000 mm
Hot-rolled sheet: 6-120 mm width: 1500-3000 mm
Hot rolled stainless steel sheet (Coil) Thickness: 2.5-20mm width: 1000-3000 mm
Length: We can supply any length based on the customer's requirement
BEBON STEEL service is the "one-stop" work style. We have our own processing factory, can offer client the service like wire drawing, Grinding mirror,cutting, knurling….If you have any need about EN 10088-1 X2CrMoTi29-4 Stainless steel, please contact BEBON STEEL.
Source:
