| P235GH EN 10028-2 | Comparison of steel grades | |
| NBN629 | D371,2 | |
| DIN 17135 | A St 35 | |
| NFA36205 | Type E | |
Chemical analysis -% by mass*
| Grades | C max | Si max | Mn. max | P max | S max | N max | AL min | Cr max | Cu max | Mo max | Ni max | Nb max | Ti max | V max |
| P235GH | 0.16 | 0.35 | 0.40-1.20 | 0.03 | 0.025 | 0.012 | 0.02 | 0.3 | 0.03 | 0.08 | 0.3 | 0.01 | 0.03 | 0.02 |
Mechanical properties
| Gade | Thickness (mm) | Yield Strength MPa(min) | Tensile Strength MPa | Elongation % (min) | Impact Energy (KV J) (min) | ||
| -20℃ | 0℃ | 20℃ | |||||
| P235GH | ≤ 16 | 235 | 360 to 480 | 25 | 27 | 34 | 40 |
| 16＜t ≤40 | 225 | 360 to 480 | 25 | 27 | 34 | 40 | |
| 40＜t ≤60 | 215 | 360 to 480 | 25 | 27 | 34 | 40 | |
| 6＜t ≤100 | 200 | 360 to 480 | 25 | 27 | 34 | 40 | |
| 100＜t ≤150 | 185 | 350 to 480 | 25 | 27 | 34 | 40 | |
| 150＜t ≤250 | 170 | 350 to 480 | 25 | 27 | 34 | 40 | |
Source:
