S315MC

EN 10149-2 S315MC steel plate/ S315MC steel sheet, under EN standard,P355NL2`s MATERIAL is 1.0972. we can regard S315MC steel plates/sheets are low-perlite steel grades offer excellent bending, flanging, cold-bordering and folding properties in both longitudinal and transverse direction. The bending radii specified below should be observed as minimum values.

S315MC

EN10149-2

MATERIAL#1.092

　

　

　

Comparison of steel grades

SEW 092

-

NFA 36-231

E 315 D

BS 1449 Sec. 1.4

HR 40F30

Salzgitter Flachstahl -

PSQ 32

FK

B

S315MC steel plate Chemical analysis -% by mass*

Chemical analysis -% by mass*	C	Si	Mn	P	S ¹⁾	Al_total	Mo	Ti	B
	max.	max.	max.	max.	max.	min.	max.	max.	max.
	0,12	0,50	1,30	0,025	0,020	0,015	-	0,15	-

S315MC steel sheet Mechanical properties

Mechanical properties	Yield Strength ReH [N/mm2] transv.min.	Tensile Strength Rm [N/mm2] transv.	Min.totalelongation [%]		Smallest recommended bending radius bending angles ≤ 90�
S315MC	315	390 - 510	L₀ = 80 mm	L₀= 5,65 √S₀	e¹⁾ ≤ 3	3 < e¹⁾< 6	e¹⁾ > 6
			e²⁾ < 3	e²⁾ ≥ 3	0,25 e	0,5 e	1,0 e
			20	24

Source:

Tags: S315MC, MATERIAL#1.092

S315MC EN10149-2 MATERIAL#1.092	Comparison of steel grades
	SEW 092	-
	NFA 36-231	E 315 D
	BS 1449 Sec. 1.4	HR 40F30
	Salzgitter Flachstahl -	PSQ 32
	FK	B